CSCI 3120 Operating Systems

Assignment 2: Multithreaded Sorting

Due: 16:00, Oct. 25, 2019

- Teaching Assistants:

o Lauchlan Toal (lc790935@dal.ca),

o Patricia Kibenge-MacLeaod (p.kibenge@dal.ca)

o Hui Huang (huihuang@dal.ca)

- Help Hours at CS Learning Center (2nd Floor of Goldberg Building):

o Tuesdays: 1pm-3pm, Hui Huang

o Thursdays: 2pm-4pm, Patricia Kibenge-MacLeaod

o Fridays: 12pm-2pm, Lauchlan Toal

1. Assignment Overview

In this assignment, you need to design and implement a C program that utilizes

multithreading to accomplish the task of integer sorting.

2. important Note

There is a zero-tolerance policy on academic offenses such as plagiarism or inappropriate

collaboration. By submitting your solution for this assignment, you acknowledge that the

code submitted is your own work. You also agree that your code may be submitted to a

plagiarism detection software (such as MOSS) that may have servers located outside Canada

unless you have notified me otherwise, in writing, before the submission deadline. Any

suspected act of plagiarism will be reported to the Faculty’s Academic Integrity Officer in

accordance with Dalhousie University’s regulations regarding Academic Integrity.

3. Detailed Requirements

1) Overview: In this assignment, you need to design and implement a C program that utilizes

multithreading to accomplish the task of integer sorting. Specifically, a list of integers should

be divided into two sub-lists of integers by your program. The size of the sub-lists should be

the same (note that when the total number of integers is odd, the integer in the middle of the

list should only be included one of the sub-lists). Then two separate threads (which are called

“sorting threads”) are created. Each of them sorts a sub-list using a sorting algorithm of your

choice. Finally, the sorted sub-lists are merged into a single sorted list by a third thread

(which is called “merging thread”).

2

Because global data are shared across all threads, perhaps the easiest way to store the initial

list of integers is to create a global array. Each sorting thread could work on one half of this

array. A second global array (whose size is the same as that of the unsorted integer array)

could also be established. The merging thread could then merge the sorted sub-lists into this

second array. Graphically, the operation flow of your C program could be illustrated using

the following figure:

2) Parameter Passing: As mentioned previously, the parent thread in your C program needs

to create two worker threads (i.e. the sorting threads) to complete the sorting operation.

When the worker threads are created, the parent thread needs to pass two unsorted sub-lists

of integers to the worker threads. If you choose to use a global array to store the initial list of

integers, then the parent only needs to pass the index number of the starting/ending element

of the sub-lists (instead of the sub-lists themselves) to the worker threads. To pass the index

numbers, the easiest approach is to use “struct”. For example, a struct to pass the starting

and ending index number can be found below:

typedef struct

{

int starting_index;

int ending_index;

} parameters;

Then the parent thread could create worker threads using a strategy similar to the following

approach (assuming that N1 and N2 are the starting and ending index number; tid is the

variable corresponding to thread identification; attr is the variable corresponding to thread

attributes; sorter() is the function for the worker threads):

parameters *data = (parameters *) malloc(sizeof(parameters));

3

data->starting_index= N1;

data->ending_index = N2;

pthread_create(&tid, &attr, sorter, data);

Note that, for the merging thread, the required parameters can be passed in a similar manner.

3) Program Structure: With the background knowledge mentioned above, the overall

structure of your program should look like the following skeleton:

4) Additional Requirements: Your program should also satisfy the following requirements:

a) Sorting Algorithm: You can use any sorting algorithm to sort a sub-list of integers.

However, in order to make marking easy, you need to add a comment at the beginning

of sorter(), which clearly states the name of the sorting algorithm used in your

program. Here is a list of potential sorting algorithms:

https://en.wikipedia.org/wiki/Sorting_algorithm

b) Sorting Result: Your program should sort the initial list of integers in ascending order

(i.e. from the smallest integer to the largest integer).

c) Input and Output Files:

a. Input file: The initial list of integers are provided via a file named

“IntegerList.txt”.

i. In this file, the integers are separated by commas.

ii. There is NO new line character (i.e. \n) at the end of the list.

iii. The integers in the list are positive. The range of the integers is [1, 999].

4

iv. There could be at most 500 integers in the list.

v. Your program should assume that this file is located in the same

directory as your program.

vi. An example “IntegerList.txt” is available via brightspace.

b. Output file: The sorted list of integers should be placed in a newly-created file

named “SortedIntegerList.txt”. This file should located in the same directory as

your program. The integers in this file should be separated by commas.

d) Total Number of Integers: When the total number of integers is even, each of the sublists

includes half of the integers. When the total number of integers is odd, the integer

in the middle of the list should only be included one of the sub-lists.

e) Total Number of Threads: For simplicity, there should be four threads in your

program in total. These threads include the parent thread (i.e. the thread

corresponding to main()), two sorting threads, and one merging thread.

f) Your program must use the GNU C library (i.e. glibc) to implement the required

features. Here are a few links about glibc:

a. https://www.gnu.org/software/libc/documentation.html

b. https://www.kernel.org/doc/man-pages/

c. http://man7.org/linux/man-pages/index.html

g) Compiling and running your program on bluenose.cs.dal.ca should not lead to errors

or warnings.

a. To compile and run your program on bluenose, you need to be able to upload

a file to or download a file from bluenose. Here is a tutorial on bluenose

downloading/uploading: https://web.cs.dal.ca/~society/#/

5) Readme File: You need to complete a readme file named “Readme.txt”, which includes the

instructions that the TA could use to compile and execute your program on bluenose.

6) Submission: Please pay attention to the following submission requirements:

a) You should place “Readme.txt” in the directory where your program files are located.

b) Your program files and “Readme.txt” should be compressed into a zip file named

“YourFirstName-YourLastName-ASN2.zip”. For example, my zip file should be called

“Qiang-Ye-ASN2.zip”.

c) Finally, you need to submit your zip file for this assignment via brightspace.

Note that there is an appendix at the end of this document, which includes the commands

that you can use to compress your files on bluenose.

4. Grading Criteria

The TA will use your submitted zip file to evaluate your assignment. The full grade is 20

points. The details of the grading criteria are presented as follows.

? “Readme.txt” with the correct compilation/execution instructions is provided [1 Point]

? The program retrieves the initial list of integers from “IntegerList.txt”. [1 Point]

? The parent thread creates two sorting threads, each of which sorts half (approximately

half when the total number of integers is odd) of the unsorted integers. There is a

5

comment at the beginning of sorter(), which clearly indicates the name of the sorting

algorithm implemented in your program. [10 Point]

? After the sorting threads terminate, the parent thread creates a merging thread, which

merges the sorted sub-lists into the final sorted list. [6 Points]

? The program creates a new file named “SortedIntegerList.txt”, which includes the sorted

list of integers and is located in the same directory as your program. The integers are

separated using commas. [1 Point]

? Proper programming format/style (e.g. release the memory that is dynamically allocated

when it is not needed any more; proper comments; proper indentation/variable names,

etc.). [1 Point]

Please note that when “Readme.txt” is not provided or “Readme.txt” does not include the

compilation/execution instructions, your submission will be compiled using the standard

command gcc -o A2 A2.c (or your filename), and you will receive a zero grade

if your program cannot be successfully compiled on bluenose.

5. Academic Integrity

At Dalhousie University, we respect the values of academic integrity: honesty, trust, fairness,

responsibility and respect. As a student, adherence to the values of academic integrity and

related policies is a requirement of being part of the academic community at Dalhousie

University.

1) What does academic integrity mean?

Academic integrity means being honest in the fulfillment of your academic responsibilities

thus establishing mutual trust. Fairness is essential to the interactions of the academic

community and is achieved through respect for the opinions and ideas of others. Violations

of intellectual honesty are offensive to the entire academic community, not just to the

individual faculty member and students in whose class an offence occur (See Intellectual

Honesty section of University Calendar).

2) How can you achieve academic integrity?

- Make sure you understand Dalhousie’s policies on academic integrity.

- Give appropriate credit to the sources used in your assignment such as written or oral work,

computer codes/programs, artistic or architectural works, scientific projects, performances,

web page designs, graphical representations, diagrams, videos, and images. Use RefWorks to

keep track of your research and edit and format bibliographies in the citation style required

by the instructor. (See http://www.library.dal.ca/How/RefWorks)

- Do not download the work of another from the Internet and submit it as your own.

- Do not submit work that has been completed through collaboration or previously submitted

for another assignment without permission from your instructor.

- Do not write an examination or test for someone else.

- Do not falsify data or lab results.

6

These examples should be considered only as a guide and not an exhaustive list.

3) What will happen if an allegation of an academic offence is made against you?

I am required to report a suspected offence. The full process is outlined in the Discipline flow

chart, which can be found at:

http://academicintegrity.dal.ca/Files/AcademicDisciplineProcess.pdf and includes the

following:

a. Each Faculty has an Academic Integrity Officer (AIO) who receives allegations from

instructors.

b. The AIO decides whether to proceed with the allegation and you will be notified of the

process.

c. If the case proceeds, you will receive an INC (incomplete) grade until the matter is resolved.

d. If you are found guilty of an academic offence, a penalty will be assigned ranging from a

warning to a suspension or expulsion from the University and can include a notation on your

transcript, failure of the assignment or failure of the course. All penalties are academic in

nature.

4) Where can you turn for help?

- If you are ever unsure about ANYTHING, contact myself.

- The Academic Integrity website (http://academicintegrity.dal.ca) has links to policies,

definitions, online tutorials, tips on citing and paraphrasing.

- The Writing Center provides assistance with proofreading, writing styles, citations.

- Dalhousie Libraries have workshops, online tutorials, citation guides, Assignment

Calculator, RefWorks, etc.

- The Dalhousie Student Advocacy Service assists students with academic appeals and

student discipline procedures.

- The Senate Office provides links to a list of Academic Integrity Officers, discipline flow chart,

and Senate Discipline Committee.

Appendix: How to Use Zip and Unzip on Bluenose

因為專業(yè)，所以值得信賴。如有需要，請加QQ：99515681 或郵箱：99515681@qq.com

微信：codehelp

因為專業(yè)，所以值得信賴。如有需要，請加QQ：99515681 或郵箱：99515681@qq.com

微信：codehelp

因為專業(yè)，所以值得信賴。如有需要，請加QQ：99515681 或郵箱：99515681@qq.com

微信：codehelp